Beam Alert Kit
Beam Alert Kit
Wide coverage detection dual-beam kit that detects people and vehicles, with Alert Receiver.
Try now, with our 30 day money back guarantee
Product Includes
Pair of Beam Sensors (rubber weatherproof seal)
Screws to mount each Beam Sensor
2 x Mounting Bracket options – wall or pole option
1 x Single Alert Receiver
1 x Plug Pack for Alert Receiver
Product Code: SBB-4000-ANZ
Product Features
Complete kit to cover one driveway / access point
Up to 1.6km line of site between Beam Sensors and Alert Receiver.
Beam Sensors have detection coverage up to 100m.
Detects heat motion - people, animals and vehicles.
Solar Powered, no wiring required. Back up batteries in Beam Sensors ensure it runs at night.
Kit can be expanded to cover up 16 entrance ways.
How it works
The Beam Sensors are set up on the driveway or area you want to monitor. There are two Beam Sensors in the kit, and these can be mounted up to 100 metres apart on a solid post or building. There is 2 (invisible) beams that are transmitted between the Beam Sensors. Anything interrupting the beams will cause a signal to be sent to the Alert Receiver, which plays a tone to alert you – so is usually set up in your house, shed, office etc.
The kit has a range of 1.6km (1.0 mile) between the Beam Sensors and the Alert Receiver.
What else do I need to know?
Beam Sensors
The Beam Sensors (on the driveway) are solar powered.
Batteries keep the Beam Sensors operating at night.
Receiver
The Alert Receiver (in the house) is powered by a plug pack, which plugs into a wall socket (this is included in the kit).
Your Alert Receiver has four different volume levels.
You can program your Alert Receiver to play one of 12 tunes.
If you have more than one set of Beam Sensors connected to your receiver, you can program your receiver to play a different sound for each set of Beam Sensors to help you identify which entranceway someone has entered by.
Compliance
This product is compliant with NZ & Australian Radio Regulations.